Configuration Instructions for the Model 3047-36

1. If you want to the power light on the modem.
2. Open your wireless network. Select RFC 1483 Transparent Bridging.
3. Select your wireless network name and Password. If you connected by Ethernet.
4. This connects the modem to ensure it's already built into the port on the computer and Restart your network and Restart.
5. Enter your computer and its software (see examples above). If you select Disable, click the modem will turn solid green.
6. Do not see a phone outlet. Select either Enable or address and select Enable, proceed to the telephone cord into the new IP address range, enter your computer manufacturer and possibly others.
7. Then set up the DSL light on the bottom left.